Pipe Bend Manufacturer

Dimensions of Socket Weld Caps, NPS 1/2 to NPS 4, ASME B16.9 End Caps, Weights, Dimensions and dimensional tolerances of End Caps, NPS 1/2 to NPS 48

Buttweld Fitting Weights, Weights of Buttweld Caps SCHEDULE STD XS 160 XXS, DIMENSIONAL TOLERANCES OF END CAPS ASME B16.9, Dimensions Butt Weld Caps NPS 1/2 - 48 ASME B16.9, Dimensions of Socket Weld Caps, NPS 1/2 to NPS 4

End Cap Rate List / 2017 Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap Price in India, Stainless Steel End Cap manufacturers, exporter, Suppliers. Kanak Metal ISO certified Company is one of the largest manufacturers of Stainless Steel End Cap in Mumbai India

Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap Available for Immediate Supply - Contact Us For Best Prices!

Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap Manufacturer and Suppliers in India

Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap at Factory Rate
Manufacturers & Suppliers

|

 

A182 F304/304L S/W END CAP / A182 F316/316L S/W END CAP PRICE

 A 182 F304/304L S/W END CAPA 182 F316/316L S/W END CAP
NBSIZE3000 #6000#SIZE3000 #6000# 
151/2"$0.53$0.901/2"$0.68$1.05 
203/4"$1.05$1.433/4"$1.20$1.50 
251"$1.50$1.951"$1.65$2.11 
321 1/4"$2.11$2.631 1/4"$2.41$2.86 
401 1/2"$2.71$3.761 1/2"$3.01$4.06 
502"$4.51$5.562"$4.89$6.17 
652 1/2"$6.17$8.272 1/2"$7.07$8.57 

Dimensions Socket Weld Caps ASME B16.11

Dimensions NPS 1/2 to 4 - Class 3000

NPS Socket
Bore
Depth
Socket
Length
Cap
Diameter
Cap
B J Q R
1/2 21.95
21.70
10 19 32
3/4 27.30
27.05
13 23 38
1 34.05
33.80
13 26 45
42.80
42.55
13 28 55
48.90
48.65
13 30 65
2 61.35
61.10
16 36 75
74.20
73.80
16 38 92
3 90.15
89.80
16 42 110
4 115.80
115.45
19 48 140
NPS B J Q R
Socket
Bore
Depth
Socket
Length
Cap
Diameter
Cap
Socket Weld End Cap

Dimensions NPS 1/2 to 4 - Class 6000

NPS Socket
Bore
Depth
Socket
Length
Cap
Diameter
Cap
B J Q R
1/2 21.95
21.70
10 22 34
3/4 27.30
27.05
13 26 41
1 34.05
33.80
13 28 50
42.80
42.55
13 30 58
48.90
48.65
13 32 66.5
2 61.35
61.10
16 38 85
NPS B J Q R
Socket
Bore
Depth
Socket
Length
Cap
Diameter
Cap
Socket Weld End Cap General notes:
  • Dimensions are in millimeters unless otherwise indicated.
  • Socket Bore (B) - Maximum and Minimum dimensions.

Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap SUPPLY



DOMESTIC SUPPLY DESTINATIONS FOR Stainless Steel A182 F304/304l F316/316l Socket Weld End Cap



Dimensions Butt Weld Caps NPS 1/2 - 48 ASME B16.9

CAP ASME B.16.9

NPS O.D.
D
LENGTH
H
LENGTH
H1
1/2 21.3 25 25
3/4 26.7 25 25
1 33.4 38 38
42.2 38 38
48.3 38 38
2 60.3 38 44
73 38 51
3 88.9 51 64
101.6 64 76
4 114.3 64 76
5 141.3 76 89
6 168.3 89 102
8 219.1 102 127
10 273 127 152
12 323.8 152 178
14 355.6 165 191
16 406.4 178 203
CAP ASME B.16.9
NPS O.D.
D
LENGTH
H
LENGTH
H1
18 457 203 229
20 508 229 254
22 559 254 254
24 610 267 305
26 660 267 ...
28 711 267 ...
30 762 267 ...
32 813 267 ...
34 864 237 ...
36 914 267 ...
38 965 305 ...
40 1016 305 ...
42 1067 305 ...
44 1118 343 ...
46 1168 343 ...
48 1219 343 ...
NPS O.D.
D
LENGTH
H
LENGTH
H1
General notes:
  • Dimensions are in millimeters unless otherwise indicated.
  • Wall thickness (t) must be specified by customer.
  • The shape shall be ellipsoidal and shall conform to the requirements given in the ASME Boiler and Pressure Vessel Code.
  • Length (H) applies for thickness not exceeding that given in column "Wall Thickness" for Length, H.
  • Length (H1) applies for thickness greater than that given in column "Wall Thickness" for NPS 24 and smaller. For NPS 26 and larger, length H1 shall be by agreement between the manufacturerand purchaser.

DIMENSIONAL TOLERANCES OF END CAPS ASME B16.9

Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8
Outside Diameter
at Bevel (D)
+ 1.6
- 0.8
1.6 1.6 + 2.4
- 1.6
Inside Diameter at End 0.8 1.6 1.6 1.6
Overall Length (H) 3 3 3 6
Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter
at Bevel (D)
+ 4
- 3.2
+ 6.4
- 4.8
+ 6.4
- 4.8
+ 6.4
- 4.8
Inside Diameter at End 3.2 4.8 + 6.4
- 4.8
+ 6.4
- 4.8
Overall Length (H) 6 6 10 10
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness

Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

Note:
MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 - NPS 24. Except with regard to the outside diameter at the bevel.

Weights of Buttweld Caps

SCHEDULE STD XS 160 XXS

Weights, Dimensions of Butt Weld End Caps
NPS STD XS SCH 160 XXS
1 0.09 0.14 0.18 0.23
0.14 0.18 0.23 0.34
0.18 0.23 0.27 0.41
2 0.27 0.34 0.57 0.68
0.41 0.45 0.79 1.13
3 0.68 0.79 1.32 1.81
0.91 1.13 - 2.72
4 1.13 1.36 2.68 3.4
5 2.04 2.49 4.54 5.44
6 2.95 4.08 6.8 8.16
8 5.44 7.26 14.06 13.61
10 9.07 11.34 25.85 -
12 13.61 16.33 43.09 -
14 16.33 20.41 - -
16 18.14 24.49 - -
18 24.49 32.66 - -
20 34.02 39.01 - -
22 42.64 56.7 - -
24 43.54 58.97 - -
26 53.98 72.12 - -
30 78.02 103.87 - -
NPS STD XS SCH 160 XXS

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Buttweld Fitting Weights

ASME buttweld fitting specifications do not specify weights for fittings. Weights quoted in the table on this page are based on manufacturers information and should be considered as approximate and provided as a guide only (fitting weights can vary considerably between manufacturers due to differences in construction).